HVAC Services in Inland Empire

AIRPRO SOLUTIONS provides HVAC services in the Inland Empire - from Corona and Eastvale to Riverside, Ontario, Rancho Cucamonga, Upland, Fontana, and Chino - with permits, utilities, and equipment matched to each city.

  • Licensed
  • 4.8-star rated
  • Residential & commercial
  • Eight cities covered
Map showing the Inland Empire service areaInland Empire, CA 8 cities served
8 citiescovered on this page
4.8★average rating, 40 reviews
LicensedCA LIC #1126691, #50251
Eight permit officesone region, city-by-city rules

Quick answer

AIRPRO SOLUTIONS is a licensed HVAC contractor serving the Inland Empire, including Riverside, Corona, Ontario, Rancho Cucamonga, Chino, Fontana, Upland, and Eastvale, for homes, multifamily buildings, and commercial properties. Heat, housing age, utility territory, and permit rules change by city and sometimes by address, so every recommendation starts with the property, not a region-wide assumption.

Local knowledge

Long, hot summers and cool nights: what that means for your system

  • 90.6°F July normal high at Riverside Municipal Airport, 1991-2020
  • 18 days in a typical July at or above 90°F at that station
  • 115°F reached in Riverside on September 6, 2024
  • 118°F Riverside's July record high

Inland Empire summers are a cooling-load story. the September 2024 heat wave pushed Riverside to 115°F. Equipment here runs hard and long, which is why a system that was fine on paper can struggle in a heat wave.

Heating still matters. A 1980 to 1990 record at a San Bernardino-area station, Norton AFB, shows 96 days a year at or above 90°F and 21 at or above 100°F, and also 66 days below 40°F, with about 1,602 cooling degree days against 1,846 heating degree days. It is an older, single-station record, so treat it as a sense of the pattern, not a current forecast.

We did not find city-level climate data for Corona, Rancho Cucamonga, Chino, Fontana, Upland, or Eastvale, so we use nearby stations for context only. We size equipment from a load calculation for your specific building, not from a regional temperature assumption.

Where each city sits

Riverside County

RiversideCoronaEastvale

San Bernardino County

OntarioRancho CucamongaChinoFontanaUpland

Getting around: we serve the Inland Empire along the 91, 60, 10, 15, 210, and 215 corridors. Arrival times vary with freeway traffic and appointment availability.

Climate figures are from nearby weather stations, not city averages. Riverside Municipal Airport figures are 1991-2020 normals and the Norton AFB record covers 1980 to 1990. County grouping shows where each city sits and is not a climate-zone or permit boundary.

Property types

Older neighborhoods in Riverside and Ontario, newer housing in Rancho Cucamonga

CityBuilt before 1970Age groupHousing mix
Riverside39.5%Older, establishedMix of detached homes and multifamily
Ontario36.1%Older, establishedMix of detached homes and multifamily
Corona15.6%MiddleMostly detached single-family homes (66.9%), with 20.9% of homes in buildings of 5 or more units
Rancho Cucamonga9.6%NewerMostly detached single-family homes (62.5%), with 24.0% of homes in buildings of 5 or more units

Share of homes built before 1970, 2018 data. Cities are listed from the highest share to the lowest, and the age group is a general grouping, not a ranking of city size.

Structure type shapes the job. Corona, Riverside, Upland, Ontario, and Rancho Cucamonga have a heavier mix of multifamily buildings. Attached and multifamily properties can mean shared roofs, limited equipment locations, and association rules.

Age is only a starting point. SCAG’s local profile for Upland says 1970 to 1979 is the decade with the highest share of its housing units. Age alone does not tell us about attic access, foundation type, or original ductwork, so those are confirmed at a site visit before recommending repair or replacement.

Residential and commercial

Established neighborhoods, newer housing, and warehouse-scale buildings

Residential

Homes, condos, and apartments

From older Riverside neighborhoods to newer housing in Corona and Rancho Cucamonga, with access, placement, and association rules checked first.

  • Single-family homes
  • Condos and townhomes
  • Apartments
Residential HVAC

Commercial

Commercial properties

Commercial and industrial developments around Victoria Gardens in Rancho Cucamonga, Downtown Riverside, and commercial space in Ontario.

  • Offices
  • Retail
  • Restaurants
  • Rooftop units
Commercial HVAC

Districts differ. Downtown Riverside, Ontario, and Rancho Cucamonga's Victoria Gardens area each bring different building types, rooftop access, and neighbor conditions.

Rooftop units may need review. Rooftop equipment can be subject to placement or screening review, so we check placement and curb changes with the city before a unit is ordered.

Permits and code

Each city issues its own HVAC permits

All eight are incorporated cities, so mechanical permits come from each city's building department, not from Riverside County or San Bernardino County. Replacing AC, furnace, heat pump, or air handler equipment should be treated as permit-required unless the city says otherwise.

CityPermit pathWhat is different locally
RiversidePermit through the Public Permit Portal or the Permit Services counterThe City's Bulletin 140 lists no like-for-like exemption for a whole unit, so we confirm the permit path with the City.
CoronaCity eTRAKiT system or the Building Division counterThe City's fee schedule lists change-out items, but we found no rule on whole-unit replacement, so we confirm the permit path with the City.
OntarioCity online permitting portal or the Building Department counterThe City's fee schedule lists mechanical permit items, but we found no rule on whole-unit replacement, so we confirm the permit path with the City.
Rancho CucamongaCity Online Permit Center only, with no over-the-counter permitsThe City's guide lists HVAC replacement-only work among its no plan check permits, but it is an older undated document, so we confirm the permit path with the City.
ChinoBuilding DivisionThe City's Building Division page says it issues building permits and takes in plans for review, and that the City has adopted the 2022 California Building Code with some amendments. It does not say whether replacing an air conditioner needs a permit, so we confirm the permit path with the City.
FontanaBuild Fontana Public Portal or the Building & Safety counterThe City's Building & Safety page says it accepts permit and plan check applications at its counter and encourages applicants to use the Build Fontana Public Portal. The City pages we read do not say whether replacing an air conditioner needs a permit, so we confirm the permit path with the City.
UplandCitizen Self Service (CSS) Portal, onlineThe City's Building & Safety page says all Building and Safety permit applications must be submitted online through the Citizen Self Service (CSS) Portal. It does not say whether replacing an air conditioner needs a permit, so we confirm the permit path with the City.
EastvaleEastvale Permit Portal, online, or the front counterThe City's Building Safety page says most permit types can be submitted online through the Eastvale Permit Portal. Its FAQ says permits are required to replace mechanical systems and that HVAC is generally reviewed and issued over the counter when there are no special design requirements, but it does not name air conditioner replacement, so we confirm the permit path with the City.

Based on each city's published permit and fee pages where available. The City of Fontana's Building & Safety, Permits, and FAQ pages, the City of Chino's Building Division page, and the City of Upland's Building & Safety page do not say whether replacing an air conditioner needs a permit, and the City of Eastvale's Building Safety page and FAQ do not name air conditioner replacement. For Riverside, the City lists no like-for-like exemption for a whole unit, for Ontario the City lists mechanical permit fee items but we found no whole-unit replacement rule, and Rancho Cucamonga takes every permit through its Online Permit Center. For Corona it was not confirmed in the sources we reviewed, so we confirm with the city before work begins. Procedures change.

Title 24 checks depend on the job. Refrigerant charge verification applies to air conditioners in Climate Zones 2 and 8 through 15 and to heat pumps everywhere. Duct sealing and testing may apply, and a setback thermostat upgrade can be required when a refrigerant component is replaced.

Climate zone is set by address. Which checks apply depends on the climate zone for your property, so we confirm it by address rather than by city. Not every job needs every test.

Placement and screening

Where the outdoor unit can go depends on the building

CitiesPlacement and screening
Riverside, Corona, and Rancho CucamongaZoning, screening, HOA approval, and noise conditions depend on the specific property, so confirm them before choosing where equipment goes.
Chino, Fontana, Upland, and EastvaleWe did not find a City page we could read that states placement, screening, or noise rules for outdoor HVAC equipment, so zoning, screening, HOA approval, and noise conditions for the specific property need to be confirmed with the City before choosing where equipment goes.

Code text changes, so current requirements are confirmed with the city before installation.

Utilities and rebates

Your utility accounts decide which programs to look at

Electric service depends on location. Riverside is served by Riverside Public Utilities, Corona is mostly SCE, and natural gas is supplied by SoCalGas outside Riverside, Chino, Fontana, and Upland. We confirm the gas provider by address in Riverside, Chino, Fontana, and Upland.

Riverside Public Utilities

Published rebates for heat pumps, air conditioners by efficiency rating, and tune-ups, all subject to funding. Dollar amounts are not listed here and are confirmed with the utility.

SCE thermostat credit

A thermostat credit for eligible SCE customers. It is a program credit, not an equipment rebate, and we did not find a standard SCE rebate for AC or heat pump replacement.

TECH Clean California

A state incentive program for heat pump systems. Funding is limited and eligibility depends on the property, so confirm availability before installation.

Corona has small city electric areas. Most of Corona is served by SCE, but small areas including Dos Lagos, The Crossings, Corona Pointe, and Princeland have city electric service. Confirm your utility by address before relying on a program.

Rancho Cucamonga has a city electric utility in limited areas. The City lists Southern California Edison as the main electric provider, and Rancho Cucamonga Municipal Utility serves limited areas, including Victoria Gardens Mall and several named developments. Confirm your utility by address before relying on a program.

Program details change quickly. Riverside Public Utilities rebates, the SCE thermostat credit, and TECH Clean California incentives are all subject to funding. We do not list dollar amounts here.

Rebates and eligibility vary by service address, utility account, equipment efficiency, and available funding. Confirm final eligibility, amount, and application requirements with your utility before installation.

Utilities in these cities

Riverside electric: Riverside Public UtilitiesCorona electric: mostly SCEOntario electric: SCERancho Cucamonga electric: SCE, with Rancho Cucamonga Municipal Utility in limited areasChino, Fontana, Upland, and Eastvale electric and gas: not confirmed from a City source, so check your billOntario and Rancho Cucamonga gas: SoCalGasNatural gas: SoCalGas outside Riverside, Chino, Fontana, Upland, and Eastvale, where we confirm the provider by address
Confirm by address: the electric and gas providers for Chino, Fontana, Upland, and Eastvale are not confirmed from a City source, so verify your utility before relying on any program.

Cities served

The eight cities on this page

See our Riverside, Ontario, Corona, Rancho Cucamonga, Chino, Fontana, Upland, and Eastvale pages, or browse all service areas.

Map showing the Riverside, CA service area

Riverside

Among the older housing stock here: 39.5% of homes were built before 1970. Riverside Public Utilities is the electric utility and publishes its own AC, heat pump, and tune-up rebates, subject to funding.

Areas: Downtown, Arlington, La Sierra, Canyon Crest, Orangecrest, Mission Grove

Utility: Electric: Riverside Public Utilities. Gas provider confirmed by address.

View area
Map showing the Corona, CA service area

Corona

15.6% of homes were built before 1970, and 66.9% are detached homes. Electric service is mostly SCE, with small city electric areas, and the City sets setback and noise rules for outdoor units.

Areas: Dos Lagos, Eagle Glen, Sierra Del Oro, Downtown Corona

Utility: Electric: mostly SCE. City electric areas include Dos Lagos, The Crossings, Corona Pointe, and Princeland.

View area
Map showing the Ontario, CA service area

Ontario

36.1% of homes were built before 1970, and Ontario Ranch adds new construction. The City names Southern California Edison as the electric utility and Southern California Gas Company as the gas utility.

Areas: Ontario Ranch, the airport area

Utility: Electric: SCE. Gas: SoCalGas.

View area
Map showing the Rancho Cucamonga, CA service area

Rancho Cucamonga

Newer housing, with 9.6% of homes built before 1970 and 62.5% detached homes. The City takes every permit through its Online Permit Center, and its own municipal utility serves limited areas alongside SCE.

Areas: Victoria Gardens, Foothill Boulevard, Cucamonga Town Center, HART District

Utility: Electric: SCE, with Rancho Cucamonga Municipal Utility in limited areas. Gas: SoCalGas.

View area
Map showing the Chino, CA service area

Chino

The City's Building Division page says it has adopted the 2022 California Building Code with some amendments and does not say whether replacing an air conditioner needs a permit. QuickFacts reports a 64.0% owner-occupied housing unit rate for 2020 to 2024. We confirm the current steps with the City.

Utility: Utilities: confirm by address.

View area
Map showing the Fontana, CA service area

Fontana

The City's Codes and Local Amendments page lists the 2025 California Mechanical Code and the 2025 California Energy Code, and none of the City pages we read says whether replacing an air conditioner needs a permit. QuickFacts reports a 66.8% owner-occupied housing unit rate for 2020 to 2024. We confirm the current steps with the City.

Utility: Utilities: confirm by address.

View area
Map showing the Upland, CA service area

Upland

SCAG's local profile says 1970 to 1979 is the decade with the highest share of the city's housing units, and the City's Building & Safety page says permit applications go through its online Citizen Self Service (CSS) Portal without saying whether replacing an air conditioner needs a permit. QuickFacts reports a 57.1% owner-occupied housing unit rate for 2020 to 2024. We confirm the current steps with the City.

Utility: Utilities: confirm by address.

View area
Map showing the Eastvale, CA service area

Eastvale

The City's Building Safety page says most permit types can be submitted online through the Eastvale Permit Portal, and its FAQ says permits are required to replace mechanical systems but does not name air conditioner replacement. QuickFacts reports a 78.0% owner-occupied housing unit rate for 2020 to 2024.

Utility: Utilities: confirm by address.

ZIP codes, per the City's ZIP code page: 91752 and 92880, each shared with other communities.

View area

Why AIRPRO SOLUTIONS

Recommendations that start with your address

Heat, permit path, utility, and building age all change across the Inland Empire. We check them for your property before recommending equipment, so the plan fits where you actually live or work.

4.8★Google rating
40Google reviews
8Cities on this page
LicensedCA LIC #1126691, #50251

Direct answers

Inland Empire HVAC questions, answered

Which cities does AIRPRO SOLUTIONS serve in the Inland Empire?

This page covers Riverside, Corona, Ontario, Rancho Cucamonga, Chino, Fontana, Upland, and Eastvale. These are the Inland Empire cities we list here, and the region has more. If your address is in another city or an unincorporated area, call us first, because permit and code rules differ by jurisdiction.

Do I need a permit to replace my AC in the Inland Empire?

Plan on it in all eight cities. Mechanical permits are issued by each city, not by Riverside County or San Bernardino County. The City of Fontana’s Building & Safety, Permits, and FAQ pages, the City of Chino’s Building Division page, the City of Upland’s Building & Safety page, and the City of Eastvale’s Building Safety page and FAQ do not say whether replacing an air conditioner needs a permit (the Eastvale FAQ says permits are required to replace mechanical systems but does not name air conditioners). Riverside lists no like-for-like exemption for a whole unit, Ontario lists mechanical permit fee items but no whole-unit rule we found, and Rancho Cucamonga takes every permit through its Online Permit Center, so we confirm each path with the City. For Corona, we did not confirm a whole-unit rule in the sources we reviewed, so we confirm the path with the City before work begins.

What is Title 24 and how does it affect an HVAC replacement?

Title 24 is California's building energy code. For air conditioners, refrigerant charge verification applies in Climate Zones 2 and 8 through 15, and for heat pumps everywhere. Duct sealing and testing may also apply, and a setback thermostat upgrade can be required when a refrigerant component is replaced. Confirm your climate zone by address, because not every job needs every test.

Which utility serves my home, and are there HVAC rebates?

It depends on your address. Riverside is served by Riverside Public Utilities. Corona is mostly Southern California Edison (SCE), with small city electric areas. In Rancho Cucamonga, SCE is the main electric provider and Rancho Cucamonga Municipal Utility serves limited areas. We have not confirmed Chino’s, Fontana’s, Upland’s, or Eastvale’s electric or gas provider from a City source. Outside Riverside, Chino, Fontana, Upland, and Eastvale, natural gas is supplied by Southern California Gas Company (SoCalGas), and in Riverside, Chino, Fontana, Upland, and Eastvale we confirm the gas provider by address. Programs, amounts, and funding change, so confirm your utility by address and confirm current eligibility before installation.

How hot does it get, and does that change equipment sizing?

Yes, the heat is a real design factor. The July normal high at Riverside Municipal Airport is 90.6°F, and on September 6, 2024 Riverside reached 115°F. Those are station readings, not city averages, so we size equipment from a load calculation for your specific building.

Does AIRPRO SOLUTIONS handle commercial HVAC in the Inland Empire?

Yes, for offices, retail, restaurants, and other commercial properties. The commercial mix includes commercial and industrial developments around Victoria Gardens in Rancho Cucamonga, Downtown Riverside, and commercial space in Ontario. Rooftop equipment can be subject to placement or screening review, and we confirm the rules with each City.

Do older homes in the Inland Empire need different HVAC work?

Often, yes. Homes built before 1970 are 39.5% of Riverside (2018 data), and SCAG’s local profile for Upland says 1970 to 1979 is the decade with the highest share of its housing units. Age alone does not tell us about attic access, foundation type, or original ductwork, so those are confirmed at a site visit before recommending repair or replacement.

How quickly can a technician reach me?

Arrival times vary with freeway traffic and appointment availability. Service runs along the 91, 60, 10, 15, 210, and 215 corridors. Dispatch timing is confirmed when service is scheduled, based on your location and technician availability.

Get HVAC service anywhere in the Inland Empire

Tell us your address and we will confirm the city, permit path, utility, and equipment options that apply.